Industrial Hygienic Pumps for Food, Beverage & Pharma

Safe, maintenance-friendly hygienic pumps

Hygienic pumps are specially designed for use in industries that require high standards of hygiene including food and beverage, pharmaceutical, cosmetics, and biotechnology manufacturing.
They are constructed from non-toxic, non-contaminating materials and are designed to:

Prevent contamination and ensure product purity
Have no dead spaces or defects where bacteria can grow
Drain freely
Allow easy and thorough cleaning or sterilisation in place (CIP/ SIP)

Prime Fluid Management supplies pumps that are EHEDG and FDA-certified, and are thoughtfully engineered for ease of maintenance and cleaning once installed.

Wangen Twin Screw

Gentle handling of non-flowable media

The Wangen Twin Screw combines advanced technology and service-friendly design for optimal performance and reliability:

Service-Friendly Design – spindle replacement without re-synchronisation/ quick seal changes.
Wide Pressure Range – up to 30 bar.
Gentle & Efficient – high suction lift, low pulsation, reversible pumping, wide viscosity, run dry.
Long Service Life – enhanced shaft durability and large housing connectors for greater longevity.

Wangen Vario Twin NG

Hopper and conveyor add-on to Wangen Twin Screw

A patented add-on to the Wangen Twin Screw pump, the Wangen Vario Twin NG with hopper and screw conveyor is designed specifically to pump highly viscous non-flowable media.

Coreless screw for ultra gentle product treatment.
Cantilevered support of the screw results in minimal residue.
Tailor hopper length for optimal application efficiency.

Hopper and conveyor add-on to Wangen Twin Screw

Overview of our Hygienic Pumps

Wangen Hyline PC Pumps

The Hyline Series by Wangen features flexible and maintenance-free joints, and sedimentation-free design. Convey or dose food and beverages, cosmetics and pharmaceuticals.

Max flow: 7m3/hr
Max pressure: 20 bar
Max solids: 26mm

View Brochure

Wangen Hygienic PC Pumps

Wangen’s KB-SL, KL-SL and KL-RF hygienic progressive cavity pumps are tailored to convey low to very high viscosity media.

Max flow: 150m3/hr
Max temp.: 140°C
Max pressure: 48 bar
Max viscosity: 200,000 mPa-s

View all

High Pressure Hygenic PC

Available as a mobile or stationery unit, the MX-series hygienic progressive cavity pump offers differential pressure up to 80 bar.

Max flow: 100m3/hr
Max pressure: 80 bar
CIP/SIP cleaning possible

View Brochure

Wangen Twin Screw

Wangen Twin Screw pumps ensure smooth, gentle pumping of viscous, abrasive or shear-sensitive fluids, with CIP/SIP cleaning and minimal downtime.

Max flow: 200 m3/hr
Max pressure: 30 bar
Max solids: 40mm

VIew Brochure

Wangen Vario Twin Screw

A patented feeder unit for the Wangen Twin Screw pump. Conveys highly viscous, non-flowable media with variable hopper length.

Max flow: 10 m3/hr
Max temp: 90°C
Max viscosity: 3,000,000 mPa-s

VIew Brochure

Wangen KB-SL Hygienic

The KB-SL hygienic progressive cavities pump series offers reliability at low rotational speeds and exceptional operational safety.

Max flow: 4.6 m3/hr
Max pressure: 48 bar
Max solids: 24mm

View Brochure

Wangen KL-SL Hygienic

The KL-SL series offers heating and cooling modes, CIP, low pulsation and superior performance over long distances and heights.

Max flow: 150m3/hr
Max pressure: 48 bar
Max solids: 95mm

View Brochure

GALLERY

In the field

Here are some examples of our solutions being used.

Talk to us today

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

Mark CadwalladerCatchment Worker

This sort of unique system you set up is what sets you apart from others in the Market

Jacob Warmsley Project Manager

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

Peter FisherDirector

You guys had our backs from the get-go and stood beside us and persevered.

DaveOps Director

We called for a different type of solution…... We were pretty happy with what's been delivered

Rob KerrProject Director

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Priscilla EllmersWastewater Supervisor

Let’s sort your fluid management needs
Speak to an expert

Tony Hylands
Industrial Pumping Solutions

Phone

Kobus van der Merwe
Industrial Sales Engineer

Phone

Charlie Petrie
Sales Manager

Phone

Questions

FAQ

At Prime Fluid Management, we understand that every fluid management challenge brings unique considerations. Here, you’ll find clear, practical answers and expert guidance to help you maximise uptime, achieve regulatory compliance, extend equipment life, and implement the most effective solution for your site.

Do you supply oil transfer pumps that can meet API 676 requirements?

Some positive displacement internal gear pump ranges are manufactured to API 676, with specific exceptions depending on the model. If API 676 compliance is part of your specification, we can confirm suitability during selection and provide the relevant documentation.

What’s the best oil transfer pump in NZ for diesel, fuel oil, or lubricating oil?

The best option depends on viscosity, temperature, and whether you need steady metered flow or high throughput transfer. For many industrial oils and fuels, internal gear and external gear pumps are common choices because they provide consistent flow and handle higher viscosity fluids well.

Can these pumps be specified for hazardous areas?

Yes, hazardous area options may be available depending on the selected pump and motor package. For example, some equipment ranges offer certified IECEx hazardous area rated configurations, which can be specified when the site classification requires it – including suitable options for Zone 1 and Zone 2 hazardous areas.

Do you need flooded suction, or can the pump run on suction lift and self priming?

It depends on the fluid, temperature, viscosity, and how the tank and pipework are laid out. A flooded suction setup is usually the most stable option for consistent performance, especially with higher viscosity oils, because the pump is always supplied with product.

If the pump needs to draw from a lower level or from a longer suction line, suction lift and self priming capability become important. However, the setup needs to be sized correctly to avoid issues like poor priming, air ingress, or cavitation. If you share your suction conditions and duty point, we can recommend a pump type and configuration that suits the installation.

What features help protect the pump and improve reliability on fuel and oil duties?

For fuel and oil applications, reliability often comes down to protecting the pump from pressure spikes and contamination, and selecting the right sealing arrangement. Depending on the pump type and duty, options can include an internal relief or bypass valve to protect against dead heading, and an inline suction strainer to reduce the risk of damage from debris.

Seal selection also matters for demanding services, with configurations such as double mechanical seals used on certain duties where additional containment or reliability is required. We can guide you on what features make sense based on the product, operating conditions, and site requirements.

What information do you need to specify a fuel transfer pump in NZ?

To specify the right fuel transfer pump for a New Zealand site, we typically need the fuel type, required flow rate, temperature, and viscosity, along with suction conditions such as flooded suction or suction lift.

Once we have those details, we can confirm the most suitable pump type and configuration for your application – including options for heavier fuels where viscosity is higher.

Industrial Hygienic Pumps

Safe, maintenance-friendly hygienic pumps

Gentle handling of non-flowable media

Hopper and conveyor add-on to Wangen Twin Screw

Overview of our Hygienic Pumps

Questions? Specifications? Talk to one of our Industrial Specialists today.

See other Industrial Pumps

Read Industrial Articles

In the field

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

This sort of unique system you set up is what sets you apart from others in the Market

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

You guys had our backs from the get-go and stood beside us and persevered.

We called for a different type of solution…... We were pretty happy with what's been delivered

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Make an enquiry

Let’s sort your fluid management needs
Speak to an expert

FAQ

Find your local expert

Solutions

Resources

Company

Locations

Contact Us

Find us on

Sign up to news

Equipment • Expertise • Results

Industrial Hygienic Pumps

Safe, maintenance-friendly hygienic pumps

Gentle handling of non-flowable media

Hopper and conveyor add-on to Wangen Twin Screw

Overview of our Hygienic Pumps

Questions? Specifications? Talk to one of our Industrial Specialists today.

See other Industrial Pumps

Industrial Chemical Pumps

Crest Vertical Immersion Pumps

GVR External Gear Pumps

Industrial Side Channel Pumps

Fuel and Oil Pumps for Transfer and Industrial Duties

Self-Priming Centrifugal Pumps

Hot Oil Pumps

Food Processing Pumps

Hygienic Progressive Cavity Pumps

Hot Water Pumps

Multistage Pumps

Hygienic Pumps

Marine Pumps

Solids Handling Pumps & Stirrers

Viscous Fluid Pumps

Wastewater Pumps

Industrial Vacuum & Blowing Pumps

Read Industrial Articles

In the field

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

This sort of unique system you set up is what sets you apart from others in the Market

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

You guys had our backs from the get-go and stood beside us and persevered.

We called for a different type of solution…... We were pretty happy with what's been delivered

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Make an enquiry

Let’s sort your fluid management needs Speak to an expert

FAQ

Find your local expert

Solutions

Resources

Company

Locations

Contact Us

Find us on

Sign up to news

Equipment • Expertise • Results

Let’s sort your fluid management needs
Speak to an expert