Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE:
0800 482 747
E-MAIL:
info@primefluid.co.nz
Contact
PHONE HOTLINE:
0800 482 747
E-MAIL:
info@primefluid.co.nz
Contact

Solutions HOT
Dewatering, Bypass & Sewage
Effluent Management
Industrial
Sludge & Slurry
Stormwater/Flooding
Wastewater Treatment
Water Treatment

Popular
Dewatering, Bypass & Sewage
Piston Pumps NEW
Water Quality Monitoring

Pump Types
Auto Prime
Air-operated
Centrifugal - Effluent
Chemical Pumps
Concrete Washdown
Dredge Pumps - Dewatering
Dredge Pumps - Sludge & Slurry
Dredges
Flexi, Trash & Diaphragm
Flood Control Pumps
Flood Response Trailers
High Head Pumps
Handy-sized Pumps
Lamella Settling Tanks
Multi-use Flood Pumps
Peristaltic Pumps
pH Correction

Piston Pumps
PTO - Auto Prime
PTO - Flood Response
Primary Sludge
Progressive Cavity - Effluent
Proportional Dosing
Settling Tanks & Bag
Submersibles - Drainage
Submersibles - Effluent
Submersibles - Slurry & Sludge
Submersibles - Flood Response
Surface Mounted Pumps
Stirrers - Agriculture
Stirrers - WWTP
Trash, Flexi & Diaphragm
Water Quality Monitoring
Wellpointing

640x500_FI_water-treatment_lamella-clarifier-solar2

Discharge Compliance

Comprehensive water treatment and monitoring solutions

Read more
0800 482 747

Primary sludge pumps

Permanent pumping solutions for primary sludge management in wastewater treatment.

Reduce downtime for maintenance

Delivering continuous operation and performance are key requirements for wastewater treatment pumps. The abrasive, corrosive and inconsistent composition of the product demands robust construction.
WANGEN

Ultra-low maintenance pumps

Wangen pumps are recognised globally for their reliability and long service life. Wangen’s focus on precision engineering and innovative design has simplified the maintenance and operation of their progressive cavity series’.
Ultra-low maintenance pumps
DARGANG

Low noise blowers

Dargang blowers deliver low noise, low maintenance and high efficiency to the aeration and mixing process. The inlet and outlet are constructed as silencers to reduce noise and casings for the impeller and motor are individually cast. A maintenance-free shaft seal separates motor from impeller.
Low noise blowers

Overview of our Primary Sludge

Progressive Cavity - Dosing

This pump is designed for precise conveying and dosing in wastewater treatment plants. It features a durable, wear-resistant flexible joint that requires no oil filling, ensuring maintenance-free operation and preventing media contamination

  • Series: KB10 (Plastic)
  • Flow Rate: 0.5 up to 200 l/h
  • Series: KB22S (Cast Iron)
  • Flow Rate: 200 up to 4000 l/m
  • Max Pressure: 16 bar
Low Viscosity Progressive Cavity

Developed for ease of maintenance, you can change wear parts of the Wangen Xpress with the pump still in your pipeline. Suitable for low-viscous media.

  • Series: Xpress
  • Power: 7.5 – 18.5kW
  • Speed: 152 – 221rpm
  • Max flow: 102m³/hr
  • Max pressure: 6 Bar
Electric Drive Centrifugal Varisco’s J-series monoblock centrifugal pumps will fast self-prime from demanding suction heights. Handles abrasive fluids with suspended solids. Inspection & drainage covers. Max flow: 1200m3/hr Max head: 110m Max solids: 76mm Materials: cast iron, hardened cast iron, stainless steel
Wangen Hopper Feed PC

Wangen produces an extensive range of hopper feed pumps for slurries and pastes with high solids content (KL-R Series) and dewatered sludge (KL-RU, KL-RQ, KL-RS and KL-R Triplex models).

  • Max flow: 160m3/hr
  • Max pressure: 48 bar
  • Max solids: 45%
  • For extremely dry or lumpy material
View Brochure
Side Channel Blowers

Low-noise, low-maintenance, high-efficiency side channel blowers to aid aeration and mixing process of primary sludge in wastewater treatment applications.
Parts & Servicing Prime Fluid Management provides genuine parts and servicing of all pumps in our range. We hold stock of common wear parts on site. Common wear parts held on site Genuine parts Fast servicing
Wangen Progressive Cavity Effluent Pumps

Very low maintenance and highly dependable, Wangen KL Series of effluent PC pumps perform at very low rpm and features a unique, encapsulated cardon joint that is wear and maintenance-free.

  • Power: 7.5 – 18.5kW
  • Speed: 152 – 260 rpm
  • Max flow: 20 – 60m³/hr
  • Max pressure: 8-11 bar
Varisco JS Bare Shaft

Varisco J-series JS pumps are bare shaft. They can be long-coupled on a baseplate with your choice of drive unit. Additional options include:

  • Inverter
  • Flange kit
  • Automatic greaser
  • Zine anodes
View Brochure

Questions? We'll get back to you within 24 hours

Make an Enquiry
GALLERY

In the field

Here are some examples of our solutions being used.

Talk to us today

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

Mark CadwalladerCatchment Worker

This sort of unique system you set up is what sets you apart from others in the Market

Jacob Warmsley Project Manager

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

Peter FisherDirector

You guys had our backs from the get-go and stood beside us and persevered.

DaveOps Director

We called for a different type of solution…... We were pretty happy with what's been delivered

Rob KerrProject Director

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Priscilla EllmersWastewater Supervisor

Make an enquiry

Let’s sort your fluid management needs 
Speak to an expert

Tony Hylands

Tony Hylands
 Industrial Pumping Solutions

Email
Phone
Kobus van der Merwe

Kobus van der Merwe
 Industrial Sales Engineer

Email
Phone
Ben Petrie

Ben Petrie
 Agri & Industrial Specialist

Email
Phone