Pump Types
Auto Prime
Air-operated
Concrete Washdown
Dredge Pumps - Dewatering
Dredge Pumps - Sludge & Slurry
Dredges
Flexi, Trash & Diaphragm
High Head Pumps
Handy-sized Pumps
Lamella Settling Tanks
Peristaltic
pH Correction
Piston Pumps
PTO (auto prime)
Centrifugal
Primary Sludge
Progressive Cavity
Shore-mounted
Stirrers
Submersibles
Proportional Dosing
Settling Tanks & Bag
Submersibles - Drainage
Submersibles - Slurry & Sludge
Stirrers - WWTP
Trash, Flexi & Diaphragm
Water Quality Monitoring
Wellpointing
Chemicals
Food Processing
Fuels & Oils
Hot Oil
Hot Water
Hygienic
Marine
Solids Handling Pumps
Vacuum & Blowing
Viscous Fluids Pumps
Wastewater
Comprehensive water treatment and monitoring solutions
Ensuring safe, efficient heat transfer while maintaining fluid integrity is critical when handling thermal oils at high temperatures. We supply Pompe Travaini and Sihi hot oil pumps for their maintenance-friendly design and dependability. Both brands ensure:
Designed for high flow, low pressure situations where transfer of thick slurries is required.
Designed for high flow, low pressure situations where transfer of thick slurries is required.
Positive-displacement pumps that transfer medium-high viscosity fluids with minimal lubricating properties and no suspended solids.
Self-priming, multi-stage pumps offering low NPSH for medium-to-high-pressure applications for fluids with high gas content.
Wangen's KL-S, KB-S and KB22S self-priming PC pumps convey high viscous media up to 200,000mPA-s with or without solids. The KB22S is designed specifically for dosing.
Horizontal single-stage pumps for mineral or synthetic heat transfer oils up to 350°C. Suitable for positive and negative suction pressure installations, they feature a back pull-out design for maintenance without disturbing pipework.
Varisco V-Series volumetric internal gear positive displacement rotary pumps manage clean fluids with high viscosity where chemical-physical alteration must be avoided.
TCD-Series single-stage centrifugal pumps will handle thermal fluids up to 365 degrees without additional cooling systems. TCD/SP Series pumps are specifically designed for vegetable oils.
Varisco J-Series pumps suit applications that require fast priming from demanding suction heights, and the ability to manage polluted, waste and abrasive fluids with suspended solids.
Prime Fluid Management supplies genuine parts for our pump brands, holding stock of common wear parts in New Zealand.
Here are some examples of our solutions being used.