Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE:
0800 482 747
E-MAIL:
info@primefluid.co.nz
Contact
PHONE HOTLINE:
0800 482 747
E-MAIL:
info@primefluid.co.nz
Contact

Solutions 
Dewatering, Bypass & Sewage
Effluent Management
Industrial
Sludge & Slurry
Stormwater/Flooding
Wastewater Treatment
Water Treatment

Popular
Dewatering, Bypass & Sewage
Piston Pumps NEW
Water Quality Monitoring

 

 

Pump Types
Auto Prime
Air-operated
Concrete Washdown
Dredge Pumps - Dewatering
Dredge Pumps - Sludge & Slurry
Dredges
Flexi, Trash & Diaphragm
High Head Pumps
Handy-sized Pumps
Lamella Settling Tanks
Peristaltic 
pH Correction
Piston Pumps
PTO (auto prime)

Agri Pumps

Centrifugal
Primary Sludge
Progressive Cavity
Shore-mounted
Stirrers
Submersibles


Proportional Dosing
Settling Tanks & Bag
Submersibles - Drainage
Submersibles - Slurry & Sludge
Stirrers - WWTP
Trash, Flexi & Diaphragm
Water Quality Monitoring
Wellpointing

Stormwater

Flood Response
Pump Stations

Industrial

Chemicals
Food Processing
Fuels & Oils
Hot Oil
Hot Water
Hygienic
Marine
Solids Handling Pumps
Vacuum & Blowing
Viscous Fluids Pumps
Wastewater

640x500_FI_water-treatment_lamella-clarifier-solar2
Discharge Compliance

Comprehensive water treatment and monitoring solutions

Read more
0800 482 747

Mobile flood response

Large and small scale solutions to unexpected flood events.

    Back-up when you need it

    Prime Fluid Management provides high efficiency, low emission pumpsets for stopbank over-pumping and dewatering of non-draining floodwaters. The team is experienced in dealing with flood waters, and supporting regional crews and civil defence with flood containment and clean up.
    ASSET TOOLBOX

    Compact and powerful flood response units

    Boost the capacity of your Flood Response with auto-prime, PTO and submersible pumps and custom trailer units.
    Compact and powerful flood response units
    EMERGENCY HIRE & SUPPORT

    Scale and experience when you need it

    The Prime team has been involved on the ground during New Zealand’s worst flood events for the past decade. We have the expertise and systems available to deploy rapidly and at scale when you need us.
    Scale and experience when you need it

    Overview of our Flood Response

    Multi-use Flooding Pumps

    Delivering exceptional fuel economy, BBA BA Series diesel and electric-drive vacuum assisted auto prime pumps are compact, fuel efficient and easy to deploy.

    • Size: 100 – 300mm (3” – 12”)
    • Max flow: 100 - 1450m³/hr
    • Max head: 17- 8mwc Solids: up to 120mm
    PTO Tractor Pumps

    Compact, economical, efficient, BBA PTO Tractor pumps perform vacuum-based tasks on demand, including high-volume fluid and slurry transfer.

    • Size: 150 - 400mm
    • Max flow: 3000m³/hr
    • Max head: 29mwc
    • Max solids: 100mm
    Find Datasheets
    Veneroni PTO Pumps

    A tractor driven centrifugal pump with hydraulic rotation, Veneroni PTO pumps offer flexibility of use even in low immersion.

    • Size: from 250mm
    • RPM: 540rpm
    • Max power: 88kW
    • Max flow: 750L/s
    Flood Response Trailer Units Our own custom flood response trailer designed for safe storage and rapid deployment in flood situations. Rugged construction, and right-sized storage areas for pipes and couplings. Designed for BBA BA150 and BA180 auto-prime pumps.
    Generators

    Delivering significant fuel economy, our generators feature extended service intervals, large fuel tanks and silenced canopies. They can be monitored remotely.

    • Sizes: 8kW - 70kW
    • Fuel capacity: 410L - 499L
    • Weight (dry): 1050kg - 1450kg
    • Larger generators available.
    Grindex Drainage Submersibles Rugged, lightweight, run-dry electric submersibles.
    • Size: 50mm - 254mm (2” – 10”)
    • Max flow: 350L/s
    • Max head: 200m
    • Max Solids: 12mm
    Proril Drainage Submersibles Durable submersible series designed for optimal reliability.

    • Size: 50mm – 203mm (2” - 8”)
    • Max flow: 110 l/sec
    • Max head: 90m
    GALLERY

    In the field

    Here are some examples of our solutions being used.

    Talk to us today

    Read Dewatering, Bypass & Sewage articles

    Download the Civil, Quarrying & Mining Product Guide 2026

    DOWNLOAD

    See other Dewatering, Bypass & Sewage Pumps

    wellpointing piston pumps and dewatering solutions

    High-efficiency pumps & wells engineered for NZ conditions.

    Drainage Submersibles

    Submersible drainage pumps manage water levels and prevent ...

    High Head Pumps

    Efficient high head surface mount and submersible pumpsets ...

    Handy, Trash, Diaphragm Pumps

    Hard-working drainage pumps for as-required site dewatering ...

    Auto-prime Pumps

    Simplify your bypass or dewatering set-up with ...

    Dewatering dredge Pumps

    Heavy duty pumps for when dewatering gets dirty.

    They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

    Mark CadwalladerCatchment Worker

    This sort of unique system you set up is what sets you apart from others in the Market

    Jacob Warmsley Project Manager

    I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

    Peter FisherDirector

    You guys had our backs from the get-go and stood beside us and persevered.

    DaveOps Director

    We called for a different type of solution…... We were pretty happy with what's been delivered

    Rob KerrProject Director

    Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

    Priscilla EllmersWastewater Supervisor

    Make an enquiry

    Let’s sort your fluid management needs 
    Speak to an expert

    Mark Cadwallader

    Mark Cadwallader
     Hire Account Management

    Email
    Phone
    Ricardo Holt

    Ricardo Holt
     Sales Team Leader

    Email
    Phone
    Brent Petrie

    Brent Petrie
    Sales Engineer

    Email
    Phone
    Questions

    FAQ

    At Prime Fluid Management, we understand that every fluid management challenge brings unique considerations. Here, you’ll find clear, practical answers and expert guidance to help you maximise uptime, achieve regulatory compliance, extend equipment life, and implement the most effective solution for your site. 

    Is an auto-prime pump the same as a “dry prime” or dry-prime dewatering pump?

    On a lot of drawings and pump schedules, dry-prime pump or dry-prime dewatering pump is used as shorthand for a surface pump that can handle air and doesn’t need manual priming. In practice, the auto-prime units that Prime Fluid supplies are vacuum-assisted pumps with a dedicated priming system, so they meet the intent of most “dry prime” specs while giving you a modern, quieter and more efficient package.
    When would I use auto-prime dewatering pumps instead of a self-priming dewatering pump or submersible?

    Auto-prime units are usually the better option when the pump has to sit above the water, suction conditions might change, or you expect a lot of air to enter the line during setup and operation. A self-priming dewatering pump or submersible can still be the right choice on simpler, more static jobs, and Prime can talk you through which option will be more reliable and cost-effective for your site.
    Do you supply diesel dewatering pumps and can they be automated?

    Yes – Prime can supply auto-prime packages as diesel dewatering pump sets or electric sets, depending on what power you have available and how the system will run. With the right control panel and level sensors, those same units can be configured as an automated pump or “auto water pump” that starts and stops itself, which is helpful on remote or 24/7 sites where you don’t want someone constantly watching the pump.
    Can Auto-prime Pumps be used for flood control and emergency response?

    Auto-prime units are a good fit for temporary flood control pumps because they can be moved quickly, cope with long suction and discharge lines, and re-prime themselves as water levels change. Prime Fluid can set up high-flow Auto-prime Pump solutions for New Zealand councils and contractors that form part of a wider flood or stormwater contingency plan.
    What information do you need to size the right Auto-Prime Pump in New Zealand?

    To match an Auto-Prime Pump New Zealand job, one of our  sales engineers will usually ask for your required flow, total dynamic head, suction depth, discharge route, expected solids size and how long the pump needs to run. If your documents mention terms like autoprime dewatering pumps, auto vacuum pump or use a generic “dry prime” note, sending those details through with a simple sketch of the setup helps the team recommend the most suitable package for your project.