Flood Response

Back-up when you need it

Prime Fluid Management provides high efficiency, low emission pumpsets for stopbank over-pumping and dewatering of non-draining floodwaters. The team is experienced in dealing with flood waters, and supporting regional crews and civil defence with flood containment and clean up.

ASSET TOOLBOX

Compact and powerful flood response units

Boost the capacity of your Flood Response with auto-prime, PTO and submersible pumps and custom trailer units.

EMERGENCY HIRE & SUPPORT

Scale and experience when you need it

The Prime team has been involved on the ground during New Zealand’s worst flood events for the past decade. We have the expertise and systems available to deploy rapidly and at scale when you need us.

Overview of our Flood Response

Multi-use Flooding Pumps

Delivering exceptional fuel economy, BBA BA Series diesel and electric-drive vacuum assisted auto prime pumps are compact, fuel efficient and easy to deploy.

Size: 100 – 300mm (3” – 12”)
Max flow: 100 - 1450m³/hr
Max head: 17- 8mwc Solids: up to 120mm

PTO Tractor Pumps

Compact, economical, efficient, BBA PTO Tractor pumps perform vacuum-based tasks on demand, including high-volume fluid and slurry transfer.

Size: 150 - 400mm
Max flow: 3000m³/hr
Max head: 29mwc
Max solids: 100mm

Find Datasheets

Veneroni PTO Pumps

A tractor driven centrifugal pump with hydraulic rotation, Veneroni PTO pumps offer flexibility of use even in low immersion.

Size: from 250mm
RPM: 540rpm
Max power: 88kW
Max flow: 750L/s

Flood Response Trailer Units Our own custom flood response trailer designed for safe storage and rapid deployment in flood situations. Rugged construction, and right-sized storage areas for pipes and couplings. Designed for BBA BA150 and BA180 auto-prime pumps.

Generators

Delivering significant fuel economy, our generators feature extended service intervals, large fuel tanks and silenced canopies. They can be monitored remotely.

Sizes: 8kW - 70kW
Fuel capacity: 410L - 499L
Weight (dry): 1050kg - 1450kg
Larger generators available.

Grindex Drainage Submersibles Rugged, lightweight, run-dry electric submersibles.

Size: 50mm - 254mm (2” – 10”)
Max flow: 350L/s
Max head: 200m
Max Solids: 12mm

Proril Drainage Submersibles Durable submersible series designed for optimal reliability.

Size: 50mm – 203mm (2” - 8”)
Max flow: 110 l/sec
Max head: 90m

GALLERY

In the field

Here are some examples of our solutions being used.

Talk to us today

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

Mark CadwalladerCatchment Worker

This sort of unique system you set up is what sets you apart from others in the Market

Jacob Warmsley Project Manager

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

Peter FisherDirector

You guys had our backs from the get-go and stood beside us and persevered.

DaveOps Director

We called for a different type of solution…... We were pretty happy with what's been delivered

Rob KerrProject Director

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Priscilla EllmersWastewater Supervisor

Let’s sort your fluid management needs
Speak to an expert

Mark Cadwallader
Hire Account Management

Phone

Ricardo Holt
Sales Team Leader

Phone

Brent Petrie
Sales Engineer

Phone

Questions

FAQ

At Prime Fluid Management, we understand that every fluid management challenge brings unique considerations. Here, you’ll find clear, practical answers and expert guidance to help you maximise uptime, achieve regulatory compliance, extend equipment life, and implement the most effective solution for your site.

Do you supply oil transfer pumps that can meet API 676 requirements?

Some positive displacement internal gear pump ranges are manufactured to API 676, with specific exceptions depending on the model. If API 676 compliance is part of your specification, we can confirm suitability during selection and provide the relevant documentation.

What’s the best oil transfer pump in NZ for diesel, fuel oil, or lubricating oil?

The best option depends on viscosity, temperature, and whether you need steady metered flow or high throughput transfer. For many industrial oils and fuels, internal gear and external gear pumps are common choices because they provide consistent flow and handle higher viscosity fluids well.

Can these pumps be specified for hazardous areas?

Yes, hazardous area options may be available depending on the selected pump and motor package. For example, some equipment ranges offer certified IECEx hazardous area rated configurations, which can be specified when the site classification requires it – including suitable options for Zone 1 and Zone 2 hazardous areas.

Do you need flooded suction, or can the pump run on suction lift and self priming?

It depends on the fluid, temperature, viscosity, and how the tank and pipework are laid out. A flooded suction setup is usually the most stable option for consistent performance, especially with higher viscosity oils, because the pump is always supplied with product.

If the pump needs to draw from a lower level or from a longer suction line, suction lift and self priming capability become important. However, the setup needs to be sized correctly to avoid issues like poor priming, air ingress, or cavitation. If you share your suction conditions and duty point, we can recommend a pump type and configuration that suits the installation.

What features help protect the pump and improve reliability on fuel and oil duties?

For fuel and oil applications, reliability often comes down to protecting the pump from pressure spikes and contamination, and selecting the right sealing arrangement. Depending on the pump type and duty, options can include an internal relief or bypass valve to protect against dead heading, and an inline suction strainer to reduce the risk of damage from debris.

Seal selection also matters for demanding services, with configurations such as double mechanical seals used on certain duties where additional containment or reliability is required. We can guide you on what features make sense based on the product, operating conditions, and site requirements.

What information do you need to specify a fuel transfer pump in NZ?

To specify the right fuel transfer pump for a New Zealand site, we typically need the fuel type, required flow rate, temperature, and viscosity, along with suction conditions such as flooded suction or suction lift.

Once we have those details, we can confirm the most suitable pump type and configuration for your application – including options for heavier fuels where viscosity is higher.

Mobile flood response

Back-up when you need it

Compact and powerful flood response units

Scale and experience when you need it

Overview of our Flood Response

Download the Stormwater Solutions Brochure

See other Industrial Pumps

Read Industrial Articles

In the field

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

This sort of unique system you set up is what sets you apart from others in the Market

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

You guys had our backs from the get-go and stood beside us and persevered.

We called for a different type of solution…... We were pretty happy with what's been delivered

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Make an enquiry

Let’s sort your fluid management needs
Speak to an expert

FAQ

Find your local expert

Solutions

Resources

Company

Locations

Contact Us

Find us on

Sign up to news

Equipment • Expertise • Results

Mobile flood response

Back-up when you need it

Compact and powerful flood response units

Scale and experience when you need it

Overview of our Flood Response

Download the Stormwater Solutions Brochure

See other Industrial Pumps

Industrial Chemical Pumps

Crest Vertical Immersion Pumps

GVR External Gear Pumps

Industrial Side Channel Pumps

Fuel and Oil Pumps for Transfer and Industrial Duties

Self-Priming Centrifugal Pumps

Hot Oil Pumps

Food Processing Pumps

Hygienic Progressive Cavity Pumps

Hot Water Pumps

Multistage Pumps

Hygienic Pumps

Marine Pumps

Solids Handling Pumps & Stirrers

Viscous Fluid Pumps

Wastewater Pumps

Industrial Vacuum & Blowing

Read Industrial Articles

In the field

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

This sort of unique system you set up is what sets you apart from others in the Market

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

You guys had our backs from the get-go and stood beside us and persevered.

We called for a different type of solution…... We were pretty happy with what's been delivered

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Make an enquiry

Let’s sort your fluid management needs Speak to an expert

FAQ

Find your local expert

Solutions

Resources

Company

Locations

Contact Us

Find us on

Sign up to news

Equipment • Expertise • Results

Let’s sort your fluid management needs
Speak to an expert