Skip to content

Self-Priming Centrifugal Pumps

Handle Polluted, Waste and Abrasive Fluids with Suspended Solids.

    Performance at demanding heights

    Varisco’s J-Series self-priming centrifugal pumps are ideal for applications requiring rapid priming from high suction heights while handling polluted, waste, and abrasive fluids with suspended solids. Their inspectable pump casing doubles as a water reservoir, enabling quick priming without auxiliary systems, simplifying management and reducing maintenance
    Varisco J-Series

    Ease of use

    • Above ground installation – for easier control, maintenance, and management compared to submerged or vertical shaft pumps.
    • Inspection and drainage covers – allow for easy filling, washing, and unclogging
    • Wear Parts Replacement – Easily replaceable components restore original performance.
    Ease of use
    Varisco J-Series

    Durable, Versatile Pumps

    • Durable Construction – Thick-walled castings in various metallurgies resist wear and corrosion.
    • Customizable Seals – Mechanical seals with material options resist abrasion and chemical attack.
    • Solid Handling – Semi-open impeller (various metallurgies) passes solids from 8 to 76 mm.
    • Versatile Fluid Handling – Standard design supports up to 50cSt viscosity, with options for denser slurries.
    Durable, Versatile Pumps

    Overview of our Self-Priming Centrifugal Pumps

    Varisco JE Monoblock

    Direct coupled to WEG W22 electric motors, Varisco JE NT pumps fast self-prime from demanding suction heights. Ideal for dirty liquids with suspended solids.

    • Max flow:1200m3/hr
    • Max head: 110m
    • Max solids: 76mm
    • Materials: cast iron, hardened cast iron, s/s
    Varisco JS Bare Shaft

    Varisco J-series JS pumps are bare shaft. They can be long-coupled on a baseplate with your choice of drive unit. Additional options include:

    • Inverter
    • Flange kit
    • Automatic greaser
    • Zine anodes
    Varisco JP Hydraulic Motor

    Varisco J-Series JP pumps include an adaptor for a hydraulic motor.

    • Max flow:1200m3/hr
    • Max head: 110m
    • Max solids: 76mm
    • Materials: cast iron, hardened cast iron, s/s
    Varisco Self-Priming Centrifugal Trash Pumps

    Varisco ST-R Series pumps are built for handling solids-laden, abrasive fluids in demanding environments. Designed for dry-mounted setups, they offer fast priming and easy access for in-field maintenance.

    • Max flow: 420 m³/hr
    • Max head: 35 m
    • Max solids: 76 mm
    • Self-priming: 7.5 m

    Questions? Specs? Talk to one of our Industrial Specialists today.

    GALLERY

    In the field

    Here are some examples of our solutions being used.

    Read Sludge & Slurry Articles

    They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

    Mark CadwalladerCatchment Worker

    This sort of unique system you set up is what sets you apart from others in the Market

    Jacob Warmsley Project Manager

    I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

    Peter FisherDirector

    You guys had our backs from the get-go and stood beside us and persevered.

    DaveOps Director

    We called for a different type of solution…... We were pretty happy with what's been delivered

    Rob KerrProject Director

    Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

    Priscilla EllmersWastewater Supervisor

    Make an enquiry

    Let’s sort your fluid management needs 
    Speak to an expert

    Tony Hylands

    Tony Hylands
    Industrial Pumping Solutions

    Kobus van der Merwe

    Kobus van der Merwe
    Industrial Sales Engineer

    Charlie Petrie

    Charlie Petrie
    Sales Manager

    Questions

    FAQ

    At Prime Fluid Management, we understand that every fluid management challenge brings unique considerations. Here, you’ll find clear, practical answers and expert guidance to help you maximise uptime, achieve regulatory compliance, extend equipment life, and implement the most effective solution for your site. 

    What is the difference between a slurry pump and a sludge pump?

    A slurry pump is designed to move mixtures of liquid and solid particles where the liquid component helps the material flow. It is built with abrasion and corrosion resistant materials and a robust design to handle the wear from suspended solids.

    A sludge pump is designed to handle much thicker and stickier material known as sludge which has a higher solid content. These pumps often use positive displacement or slow moving mechanisms to avoid clogging and manage dense viscous fluids.

    How do sludge pumps work?
    Sludge pumps move heavy viscous mixtures using either centrifugal or positive displacement methods. Centrifugal sludge pumps use a rotating impeller to generate pressure and move the sludge. Positive displacement sludge pumps, such as progressive cavity, diaphragm, or lobe pumps, trap a fixed volume of sludge and force it through the pump. This method is especially useful for very thick or high-solid-content applications.
    What is the main source of sludge?
    Sludge typically comes from wastewater treatment processes where water is separated from solids through sedimentation or filtration. It is a semi-solid byproduct that can contain organic matter, heavy metals, and other impurities. Sludge can also come from industrial operations such as mining or manufacturing plants, where process residues and waste streams generate similar thick, viscous materials.