Hot Oil Pumps

Versatile industrial pumps

Prime Fluid Management offers a full range of hot oil pumps to suit the demands of high-temperature applications across industries. Whether it’s process heating, moulding, asphalt handling, or power generation, we have the right pump for the job. Partnering with trusted hot oil pumps manufacturers, we provide a selection of centrifugal, gear, and thermal fluid pumps, and solutions that ensure safe, efficient, and reliable heat transfer—keeping your operations running smoothly.

Use cases

Pumps for Chemical Industy and more

Process Heating: Hot Oil pumps transfer heat to process fluids or equipment in chemical plants, refineries, and food processing facilities, ensuring controlled temperature environments.
Plastics and Rubber Manufacturing: These pumps help maintain precise temperatures during moulding or extrusion processes, contributing to product quality.

Benefit

Energy Efficiency and Safety

By avoiding the direct use of steam or open flames, hot oil pumps reduce risks such as scaling, corrosion, and explosive hazards, while providing energy-efficient operation.
Our centrifugal hot oil pumps from Pompe Traiaini Pumps can be used in the temperature up to 365 degrees without additional cooling systems.

Overview of our Hot Oil Pumps

GVR External Gear

Positive-displacement pumps that transfer medium-high viscosity fluids with minimal lubricating properties and no suspended solids.

Max flow: 800L/min
Max pressure: 25bar
Max viscosity: 20,000 cSt
Material : cast iron, PTFE bronze, 316 s/s

View All

SIHI Hot Oil End Suction

Horizontal single-stage pumps for mineral or synthetic heat transfer oils up to 350°C. Suitable for positive and negative suction pressure installations, they feature a back pull-out design for maintenance without disturbing pipework.

Max temp: 350°C
Max flow: 1000 m³/h
Max head: 95 m

View datasheet

Varisco Internal Gear Pumps

Varisco V-Series volumetric internal gear positive displacement rotary pumps manage clean fluids with high viscosity where chemical-physical alteration must be avoided.

Max capacity: 240m3/h
Max pressure: 16 bar
Ports: 40-200mm
Std Set ups: bare shaft, base+joint, vertical

View Brochure

Travaini TCD Hot Oil End Suction Pumps

TCD-Series single-stage centrifugal pumps will handle thermal fluids up to 365 degrees without additional cooling systems. TCD/SP Series pumps are specifically designed for vegetable oils.

Max flow: 450 m3/hr
Max head: 150m
Max temp: 365 degrees
Material Options: Ductile Iron & AISI 316 S/Steel

View Datasheet

Industrial Pumps Servicing & Parts

Prime Fluid Management supplies genuine parts for our pump brands, holding stock of common wear parts in New Zealand.

Genuine parts
Stock held in NZ
Maintenance advice
Servicing on request

Get in touch

GALLERY

In the field

Here are some examples of our solutions being used.

Talk to us today

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

Mark CadwalladerCatchment Worker

This sort of unique system you set up is what sets you apart from others in the Market

Jacob Warmsley Project Manager

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

Peter FisherDirector

You guys had our backs from the get-go and stood beside us and persevered.

DaveOps Director

We called for a different type of solution…... We were pretty happy with what's been delivered

Rob KerrProject Director

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Priscilla EllmersWastewater Supervisor

Let’s sort your fluid management needs
Speak to an expert

Tony Hylands
Industrial Pumping Solutions

Phone

Kobus van der Merwe
Industrial Sales Engineer

Phone

Charlie Petrie
Sales Manager

Phone

Questions

FAQ

At Prime Fluid Management, we understand that every fluid management challenge brings unique considerations. Here, you’ll find clear, practical answers and expert guidance to help you maximise uptime, achieve regulatory compliance, extend equipment life, and implement the most effective solution for your site.

Is an auto-prime pump the same as a “dry prime” or dry-prime dewatering pump?

On a lot of drawings and pump schedules, dry-prime pump or dry-prime dewatering pump is used as shorthand for a surface pump that can handle air and doesn’t need manual priming. In practice, the auto-prime units that Prime Fluid supplies are vacuum-assisted pumps with a dedicated priming system, so they meet the intent of most “dry prime” specs while giving you a modern, quieter and more efficient package.

When would I use auto-prime dewatering pumps instead of a self-priming dewatering pump or submersible?

Auto-prime units are usually the better option when the pump has to sit above the water, suction conditions might change, or you expect a lot of air to enter the line during setup and operation. A self-priming dewatering pump or submersible can still be the right choice on simpler, more static jobs, and Prime can talk you through which option will be more reliable and cost-effective for your site.

Do you supply diesel dewatering pumps and can they be automated?

Yes – Prime can supply auto-prime packages as diesel dewatering pump sets or electric sets, depending on what power you have available and how the system will run. With the right control panel and level sensors, those same units can be configured as an automated pump or “auto water pump” that starts and stops itself, which is helpful on remote or 24/7 sites where you don’t want someone constantly watching the pump.

Can Auto-prime Pumps be used for flood control and emergency response?

Auto-prime units are a good fit for temporary flood control pumps because they can be moved quickly, cope with long suction and discharge lines, and re-prime themselves as water levels change. Prime Fluid can set up high-flow Auto-prime Pump solutions for New Zealand councils and contractors that form part of a wider flood or stormwater contingency plan.

What information do you need to size the right Auto-Prime Pump in New Zealand?

To match an Auto-Prime Pump New Zealand job, one of our sales engineers will usually ask for your required flow, total dynamic head, suction depth, discharge route, expected solids size and how long the pump needs to run. If your documents mention terms like autoprime dewatering pumps, auto vacuum pump or use a generic “dry prime” note, sending those details through with a simple sketch of the setup helps the team recommend the most suitable package for your project.

Versatile industrial pumps

Pumps for Chemical Industy and more

Energy Efficiency and Safety

Overview of our Hot Oil Pumps

In the field

Read Dewatering, Bypass & Sewage articles

Download the Civil, Quarrying & Mining Product Guide 2026

See other Dewatering, Bypass & Sewage Pumps

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

This sort of unique system you set up is what sets you apart from others in the Market

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

You guys had our backs from the get-go and stood beside us and persevered.

We called for a different type of solution…... We were pretty happy with what's been delivered

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Make an enquiry

Let’s sort your fluid management needs
Speak to an expert

FAQ

Find your local expert

Solutions

Resources

Company

Locations

Contact Us

Find us on

Sign up to news

Equipment • Expertise • Results

Hot Oil Pumps

Versatile industrial pumps

Pumps for Chemical Industy and more

Energy Efficiency and Safety

Overview of our Hot Oil Pumps

In the field

Read Dewatering, Bypass & Sewage articles

Download the Civil, Quarrying & Mining Product Guide 2026

See other Dewatering, Bypass & Sewage Pumps

wellpointing piston pumps and dewatering solutions

Drainage Submersibles

High Head Pumps

Handy, Trash, Diaphragm Pumps

Auto-prime Pumps

Dewatering dredge Pumps

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

This sort of unique system you set up is what sets you apart from others in the Market

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

You guys had our backs from the get-go and stood beside us and persevered.

We called for a different type of solution…... We were pretty happy with what's been delivered

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Make an enquiry

Let’s sort your fluid management needs Speak to an expert

FAQ

Find your local expert

Solutions

Resources

Company

Locations

Contact Us

Find us on

Sign up to news

Equipment • Expertise • Results

Let’s sort your fluid management needs
Speak to an expert