Industrial Side Channel Pumps

Low flow, high pressure solutions

Side channel pumps are suited to applications requiring the handling of low flow rates at high pressures, particularly with liquids containing gas or vapour. Prime Fluid Management supplies a range of durable and efficient pumps ideal for chemical processing, fuel transfer, and boiler feed applications.

Pompe Traviaini

Engineering Excellence

Pompe Travaini is a trusted manufacturer of high-quality vacuum pumps and liquid ring pumps, known for their reliability, energy efficiency, and advanced engineering. - Liquid Ring Vacuum pumps - Centrifugal pumps - Multi-stage and self-priming - Vacuum skids - Blowers, exhausters and boosters

SIHI®

Pumps for challenging industrial applications.

Specialists in industrial liquid-, gas- and vapour-handling, SIHI pumps are well-regarded for dependability in challenging industrial applications. - Side channel - Liquid ring pumps - Vacuum pumps - Compressors

Overview of our Industrial Side Channel Pumps

SIHI AEH/-X Side Channel Pumps

High duty self-priming segmental pumps designed for chemical and hazardous liquids (X) and liquified gases.

Max flow: 35m3.hr
Max head: 348m
Nominal pressure: PN40
Materials: cast iron, ductile iron, stainless steel, alloy

View Brochure

SIHI AKH/-X Side Channel Pumps

Medium duty, self-priming segmental pumps suited to shipyard use, dissolved air flotation and CIP.

Max flow: 35.5m³/hr
Max head: 144m
Nominal Pressure: PN16 PN25X
Materials: cast iron, bronze, stainless steel, alloy

View Brochure

SIHI AOH Side Channel Pumps

Self-priming pumps used for clean and grey water, wells and irrigation and fuel transfer.

Max flow: 7.5m3/hr
Max head: 100m
Nominal Pressure: PN10
Materials: cast iron, bronze

View Brochure

SIHI CEH/-X Side Channel Pumps

Handle liquified gases, condensates, chemical and hazardous liquids in unfavourable suction conditions.

Max flow: 35.5m3/hr
Max head: 354m
Nominal Pressure: PN40
Materials: cast iron, ductile iron, stainless steel, alloy

View Brochure

Travaini TBH Side Channel Pumps

Multistage self-priming centrifugal pumps. Suitable for gases, clean liquids and corrosives hot or cold.

Max. flow: 70m3/hr
Max pressure: 40 bar
Max. lift: 8.5 mwc

View Brochure

Sero SOH Side Channel Pumps

Multistage self-priming centrifugal pumps suitable for gases, clean liquids and corrosives hot or cold.

Max flow: 7.5m3/hr
Max pressure: 150m
Lift: 7m
Max Temp: 120°C

View Brochure

Industrial Pumps Servicing & Parts

Prime Fluid Management supplies genuine parts for our pump brands, holding stock of common wear parts in New Zealand.

Genuine parts
Stock held in NZ
Maintenance advice
Servicing on request

Get in touch

GALLERY

In the field

Here are some examples of our solutions being used.

Talk to us today

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

Mark CadwalladerCatchment Worker

This sort of unique system you set up is what sets you apart from others in the Market

Jacob Warmsley Project Manager

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

Peter FisherDirector

You guys had our backs from the get-go and stood beside us and persevered.

DaveOps Director

We called for a different type of solution…... We were pretty happy with what's been delivered

Rob KerrProject Director

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Priscilla EllmersWastewater Supervisor

Let’s sort your fluid management needs
Speak to an expert

Tony Hylands
Industrial Pumping Solutions

Phone

Kobus van der Merwe
Industrial Sales Engineer

Phone

Charlie Petrie
Sales Manager

Phone

Questions

FAQ

At Prime Fluid Management, we understand that every fluid management challenge brings unique considerations. Here, you’ll find clear, practical answers and expert guidance to help you maximise uptime, achieve regulatory compliance, extend equipment life, and implement the most effective solution for your site.

Do you supply oil transfer pumps that can meet API 676 requirements?

Some positive displacement internal gear pump ranges are manufactured to API 676, with specific exceptions depending on the model. If API 676 compliance is part of your specification, we can confirm suitability during selection and provide the relevant documentation.

What’s the best oil transfer pump in NZ for diesel, fuel oil, or lubricating oil?

The best option depends on viscosity, temperature, and whether you need steady metered flow or high throughput transfer. For many industrial oils and fuels, internal gear and external gear pumps are common choices because they provide consistent flow and handle higher viscosity fluids well.

Can these pumps be specified for hazardous areas?

Yes, hazardous area options may be available depending on the selected pump and motor package. For example, some equipment ranges offer certified IECEx hazardous area rated configurations, which can be specified when the site classification requires it – including suitable options for Zone 1 and Zone 2 hazardous areas.

Do you need flooded suction, or can the pump run on suction lift and self priming?

It depends on the fluid, temperature, viscosity, and how the tank and pipework are laid out. A flooded suction setup is usually the most stable option for consistent performance, especially with higher viscosity oils, because the pump is always supplied with product.

If the pump needs to draw from a lower level or from a longer suction line, suction lift and self priming capability become important. However, the setup needs to be sized correctly to avoid issues like poor priming, air ingress, or cavitation. If you share your suction conditions and duty point, we can recommend a pump type and configuration that suits the installation.

What features help protect the pump and improve reliability on fuel and oil duties?

For fuel and oil applications, reliability often comes down to protecting the pump from pressure spikes and contamination, and selecting the right sealing arrangement. Depending on the pump type and duty, options can include an internal relief or bypass valve to protect against dead heading, and an inline suction strainer to reduce the risk of damage from debris.

Seal selection also matters for demanding services, with configurations such as double mechanical seals used on certain duties where additional containment or reliability is required. We can guide you on what features make sense based on the product, operating conditions, and site requirements.

What information do you need to specify a fuel transfer pump in NZ?

To specify the right fuel transfer pump for a New Zealand site, we typically need the fuel type, required flow rate, temperature, and viscosity, along with suction conditions such as flooded suction or suction lift.

Once we have those details, we can confirm the most suitable pump type and configuration for your application – including options for heavier fuels where viscosity is higher.

Industrial Side Channel Pumps

Low flow, high pressure solutions

Engineering Excellence

Pumps for challenging industrial applications.

Overview of our Industrial Side Channel Pumps

Have Questions? Need help to spec? Speak with one of our Industrial Specialists

See other Industrial Pumps

Read Industrial Articles

In the field

They brought their mechanics, they didn't just dump it and leave….couldn't have done it without them to be honest

This sort of unique system you set up is what sets you apart from others in the Market

I had an amazing experience with Prime Pump at the Transmission Gully ... will recommend you guys anytime and anywhere.

You guys had our backs from the get-go and stood beside us and persevered.

We called for a different type of solution…... We were pretty happy with what's been delivered

Prime supplied us with the best solution for hire and the instant availability was what we needed… We certainly will be using them in the future

Make an enquiry

Let’s sort your fluid management needs
Speak to an expert

FAQ

Find your local expert

Solutions

Resources

Company

Locations

Contact Us

Find us on

Sign up to news

Equipment • Expertise • Results

Industrial Side Channel Pumps

Low flow, high pressure solutions

Engineering Excellence

Pumps for challenging industrial applications.

Overview of our Industrial Side Channel Pumps

Have Questions? Need help to spec? Speak with one of our Industrial Specialists

See other Industrial Pumps

Industrial Chemical Pumps

Crest Vertical Immersion Pumps

GVR External Gear Pumps